Monday, April 15, 2013

Unit 6 Reflection


This unit in physics we learned about charge, polarization, and electric fields! We learned how real life situations such as hair standing up after pulling a sweater over it, or why a balloon sticks to a wall after rubbed against hair, is so.

Charges:
Charges are such by the make up of protons (positive ions) and/or electrons (negative ions). Protons and electrons attract each other while protons and protons or electrons and electrons repel each other. There are three ways that an object could be come charged: friction, direct contact, and induction. When you pull a sweater over your head, the sweater steals electrons from your hair through friction. When this happens your hair is filled with protons, since protons and protons repel each other, your hair stands up!

Polarization:
When discussing polarization, it is important to recognize what a conductors and insulators are. Conductors let charges move through them, insulators stop charges from moving. An object becomes polar when the charges are separated. For example, if you stuck a rod of electrons near a neutral object, all of the protons would move closer to the rod and the electrons would move further away from it. When the negative and positive ions are separated like this, the object is polarized. This is the reason that saran wrap wont stick to metal bowls. Metal is a conductor and will send all charges to the ground whereas glass and ceramic bowls will polarize.


We applied all that we learned about electricity to everyday usage. We learned about lightning rods, light bulbs, circuit breakers, outlets, and more!

Lightning rods:
We learned that lightning rods protect structures because of their ability to prevent fires by their ability to send charges from lightning to the ground. Lightning rods are pointy metal rods that are placed on the roofs of buildings. Protons collect of the points of the rods and when lightning strikes they attract the negatives charges coming towards the ground from the clouds. When the lightning strikes the rods all the charges are send to the ground through a cable that is connected to the bottom of the rod and the ground.

Light Bulbs:
One of the many labs we did this unit required us to light a light bulb using only a battery and some wire. Through this lab we learned that the wire must be connected to the bottom of the bulb and the side of the bulb. These two places are where the wires need to be in order to complete the circuit and light the bulb. Similarly we learned that the wire in the middle of the bulb is called the filament. Based on thickness and length the filament will have either a high or low resistance and will determine how much current can run through it, affecting how bright the bulb is.

Circuit Breakers:
In this unit of physics we learned why circuit breakers commonly trip when you use too many appliances. Circuit breakers are wired as series circuits, which mean as more things are used the current remains the same, while the resistance increases. On the contrary houses are wired in parallel so when you use more appliances, the overall current being used increases. When this current gets too high it could potentially start a fire. In order to prevent a fire from happening, the circuit breaker trips. The circuit breaker flips a switch in the circuit and stops all appliances from working.

Outlets:
This unit we learned about voltage and how our outlets in America are 120-volt outlets. We learned that outlets in Europe have a higher voltage so when we take our appliances to Europe using them is actually dangerous because our appliances are not designed to handle the amount of volts that European outlets emit. 

Thursday, February 28, 2013

Mousetrap Blog


My mousetrap car traveled 5 meters at a time of 2.59 seconds. This puts my teammate and I in first place.


Here is a video that shows my mousetrap car run. 







a) Newton’s first law of motion states that an object in motion or an object at rest wants to stay that way until and outside force is exerted upon it. This law is applicable to the mousetrap race at the starting line and at the finish line. Our car begins at rest and would like to stay that way, but when we engage the mousetrap, the string that is connected and coiled around to the back axel forces that axel to turn along with the wheels propelling our car foreword. At the finish line, our car is in motion and wants to remain that way, however the friction between the wheels and the ground slows the car down and eventually stops it. Newton’s second law, a=f net/m (acceleration is directly proportional to force and inversely proportional to mass) proved helpful for my team. When building our car, Isabelle and I used very few materials and kept our car simple. Because of this our car had a smaller mass, which allowed it to have a greater acceleration. Newton’s third law, which states that every action has an equal and opposite reaction is applicable to our mousetrap car similar to the horse and buggy problem. When the axel is turned because of the force the mousetrap pops with, the wheels are going to push the ground backwards and the ground is going to push the wheels foreword.

b) The two types of friction present are with the wheels and the ground, and the axel and the wheels. Attaching the wheels to the axel without them moving was challenging at first. Originally Isabelle and I tried to wrap balloons around the axel and fasten the wheels (cds) over them that way. This proved to be unsuccessful so instead, we used tape and that worked out well. The second problem we encountered with the friction was with our wheels and the ground. Our wheels are CD’s so the friction between them and the ground is little. To fix this problem we took the centers of two balloons and stretched them around the CD. This created better friction and propelled our cars nicely and smoothly.

c) We had always planned on using four wheels. That seemed to assure the smoothest ride and best stability along with simple construction. On each axel we used a regular sized CD. Using larger wheels would have been helpful because they cover a larger distance per turn of the axel. However our wheels worked out just fine. Smaller wheels would have been detrimental to our mousetrap car because it would have required our axels to turn more times because they cover a smaller distance per rotation. 

d) Energy is essential to make our mousetrap car move. Energy is neither created nor destroyed with the motion of our car. Energy is transferred from setting off the trap and releasing the potential energy it is holding. When set, the mousetrap holds a large amount of potential energy. When the mousetrap is set off, that potential energy becomes kinetic energy and shoots the car into motion.

e) We did not extend the length of our lever arm. When we test ran our mousetrap car it went 5 meters fairly fast. Seeing this we decided it wasn’t necessary to extend ours. However, I noticed that a great deal of the other groups extended their lever arm. Doing this they were able to increase their torque and use the greater distance to uncoil their string from their axis more quickly.

e) Rotational inertia was important to our mousetrap cars because it determined how quickly the wheels began to turn. Having solid wheels is key because they have a lower rotational inertia and will begin to move more quickly. The lower rotational inertial a car had, the greater rotational velocity it would have because it would be easier for the wheels to rotate. Each wheel of our car needed to have the same tangential velocity in order for the car to travel in a straight line. The straighter the line your car travels in, the quicker it will obtain a traveling distance of 5 meters.

f) We cannot calculate the amount of work that the spring does on the car because the distance is not measureable by us. We cannot calculate the amount of potential energy because the potential energy is directly related to the amount of work that the spring can do. We cannot calculate the kinetic energy because we do not know that amount of potential energy. Similarly we cannot calculate the force because the mass and the acceleration of the spring.

Reflection:
a) Our final design was almost exact to our original design. The only difference was that instead of using balloons to fasten our wheels to the axel, we used tape.

B) We didn’t encounter too many major problems. The only problems that we faced were when the balloons failed to fasten our wheels, and to fix it we tried tape which work well. And when we engaged our mousetrap the string would get caught, so to fix that we held the trap down and released it manually rather then with the sensor.

c) In the future I would keep everything the same and maybe extend the lever arm a bit. Personally I am very satisfied with the outcome of my mousetrap car and I am content with everything that we have. 

Friday, February 15, 2013

Unit 5 Reflection


This unit in Physics we learned about work, power, potential energy, kinetic energy, and machines. Beginning with work, we learned that work = force X distance. But, this is only so when the force and distance are parallel and not perpendicular to each other. Work is measured in the unit of joules. After learning about work, we learned about power. Power = work / time. Power is essentially how quickly one is getting work done. Power is measured in watts. 746 watts is equal to one horsepower. We commonly hear the work horsepower used when talking about cars, specifically the power of their engines. Cars with a big horsepower can go faster quicker because their engines do work faster. Next, we moved on to Potential Energy. PE is energy stored and held in readiness. It is called “potential” energy because it is in a state where it has potential to do work. An objects PE is determined solely on its position. To calculate an objects PE one can use the Formula, PE = (mass)(gravity)(height). Moving on, we learned that Kinetic Energy is energy in motion. KE is dependant on an objects mass and speed. KE = 1/2mv^2. The change in KE is equal to the KE final – the KE initial. Or, the change in KE is also equal to work. If an objects speed is doubled, the KE is quadrupled. When learning about energy, it was important to know that law of Conservation of Energy. This law states that, “energy cannot be created or destroyed; it may be transformed from one form into another but the total amount of energy never changes” Post energy, we began to study the use of machines. For example, the ramp is a simple machine. Machines make doing work easier. Take the ramp for example. The ramp is going to increase the distance in which you are doing work allowing you to use less force. We know this because we know that the amount of work that you put into a machine is going to equal the same amount of work that you are going to get out. Work in = work out If you put a certain force with a certain distance in a you ultimately increase the distance with a machine your force needs to be lower in for to be equal to the previous work. Fd=fD. While machines are useful, they are never 100% efficient. Some energy will always be transferred through various things such as heat due to friction, motion or vibrations, light, or even sound.

This unit I found to be fun. Work and power were both things that I was somewhat familiar with and both were easy to relate to the real world. This unit I found myself misunderstanding some questions on the quizzes, which was 100% avoidable. I could benefit from asking questions if I need clarification during a quiz. Otherwise I feel like this unit went well for me. 

Tuesday, February 5, 2013

Unit 4 Picture

This picture is an example of centripetal force. The swings on this ride are connected to the center consul which keep them towards the center. This picture is real life example of the flying pig demonstration we did in class. If one of the swigs were to come off, that swing would fly in a straight line that is tangent to the path it was previously traveling. 

Monday, January 28, 2013

Unit 4 Reflection


Unit Reflection:
In unit 4 we learned about torque, rotational and tangential speed, rotational inertia, center of mass, center of gravity, centripetal force, and centrifugal force. To start this section we learned about rotational speed, which is the number of revolutions that are made in a certain amount of time, and tangential speed, which is the distance covered in a certain amount of time. We learned that while two people on a merry go round may have different tangential speeds, they would both have the same rotational speed. We applied our knowledge of tangential speed to roller derby and discovered that the purpose of “the whip” move is so that the skater being whipped could gain a greater tangential speed and therefore pass her opponents. Similarly we leaned that if you increase the size of your tires on your car you could be driving at a faster speed than your speedometer reads. An objects angular momentum has to do with how much mass is closer or further form the axis of rotation. An object with a larger amount of mass away from the axis of rotation is going to move slower than if the mass was closer to the axis of rotation. An object with more mass further away from the center is going to have a greater rotational inertia because it is going to be more difficult for the object to begin to move. If the mass were more towards the center however, the object is going to have a lower rotational inertia and be easier to begin moving. Next we learned about torque and center of mass. Torque causes rotation. Torque = lever arm X force. The longer the lever arm that you are using to turn an object the smaller force you are required to apply and vice versa. We then learned that because of center of mass, when we put on our backpacks, we subliminally lean foreword so we don’t fall. Because we increase our mass behind our natural center of mass we need to lean foreword and balance out our new center of mass. This action keeps us form falling over. As long as our center of mass remains under us we will stay standing. We also learned that the leaning tower of Pisa does not fall over because its center of gravity is being supported by it’s base. In other words the center of gravity is within the base of support. We then moved on to centripetal and centrifugal forces. Centripetal force is the center seeking force when you are turning on a curve in your car. The feeling of fling that you feel when you are turning on this curve is the centrifugal force. The center fleeing force you feel is the fictitious force. We learned that during the spin cycle when your clothes are in the washing machine, the water leaves the basin through little holes not because of a force but because of a lack of force present. Personally, I struggled with this unit more than I have with the others. Coming and asking questions in the morning would have been beneficial. 

Sunday, January 27, 2013

Center of Mass Resource

http://www.youtube.com/watch?v=DY3LYQv22qY


In this video, people throwing objects demonstrate center of mass. When the objects are thrown in the light they seem to be moving all over the place, but when the lights are turned off and the center of mass is painted it looks as though the object is moving through the air smoothly. With the lights off you can clearly see the center of mass, whereas when the light are on it is more difficult to see. 

Angular Momentum Resource


This video clearly demonstrates angular momentum. You can see how when the mass is closer to the axis of rotation of the object the speed at which it spins increase. This is similar to an ice skater, gymnast, or a diver. In order to spin quickly all three of these sports require the athlete to pull all of their mass in towards the axis of rotation.